Product Description First MSRP$5,000.00Analog Audio InputsEight stereo (RCA) or five stereo and one 5.1-channel or two stereo and two 5.1-channel connectorsDigital Audio InputsFour S/P-DIF coaxial (RCA) and four S/P-DIF optical (TosLink) connectors; coaxial and optical input connectors conform to IEC-958, S/P-DIF standards; accepts 44.1kHz, 48kHz, 88.2kHz and 96kHz sample rates; accepts 1624 bits PCM audio, Dolby Digital, DTS and DTS-ES discrete data formatsAudio Output(s)Eight unbalanced (RCA) connectors for front L/R, center, subwoofer, side L/R and rear L/RAudio Processing SectionA/D Conversion24-Bit, 96kHz, dual-bit architectureD/A Conversion24-Bit, 44.1kHz to 192kHz, multi-bit architectureFrequency Response10Hz to 20kHz, +0.05dB/0.1dB, 0.5dB at 40kHz, reference 1kHzTHD + NoiseBelow 0.008% at 1kHz, maximum output levelDynamic Range108dB minimum, 22kHz bandwidthS/N Ratio108dB minimum, 22kHz bandwidthInput Sensitivity200mV RMS (2V RMS for maximum output level) at 0dB input gainOutput Level150mV RMS typical, 6Vrms maximum; maximum value with full-scale input signal and volume at +12dBVideo Input & Output ConnectorsVideo InputsFive composite (RCA), five S-video and three component video (RCA)Video OutputsOne composite (RCA), one S-video and one component (RCA)Composite & S-video PerformanceCompatibilityNTSC, PAL and SECAMImpedance75 OhmsBandwidth>25MHzComponent Video PerformanceCompatibility3-Channel (Y/Pr/Pb), format-independentImpedance75 OhmsInsertion Loss<3dBBandwidth>150MHzGeneralTrigger OutputsOne power on/off and one programmable connector on 5-pin DINRS-232 Serial Input/OutputTwo 9-pin D-sub connectorsPower Requirements90 250 VAC, 50Hz 60Hz, 60W (universal line input), detachable power cordRack MountingOptional brackets are available for installation in a standard 19" equipment rack (two rack units required for AV1).Dimensions (H x W x D)3-13/16" x 17-5/16" x 14-7/8"Weight17 lb/7.7kg
Select Language
Copyright 2007 www.onlinedigitalshop.info All Right Reserved
