Color:black Media:Misc. Shipping Weight (lbs):8 Dimensions (in):22 x 3 x 10
MPN:ML413B Model:1GU ASIN:B000V7AQME
Availability:Usually ships in 1-2 business days
Features:
•
VESA 50/75/100 compliant; 44 lbs weight capacity
•
Extended Depth From Wall 17.7"; Compressed Depth From Wall: 3"
•
Multi-directional adjustment tilts, swivels, swings, and extends
•
Nesting arm design allows display to be folded parallel to wall
•
Single stud mounting. Standard hardware pack included screws to the TV and to the wall
Editorial Reviews:
Product Description The Wall Mount is ideal for obtaining side-to side rotation and upward/downward tilt. It supports LCD screens up to 44 lbs. Compatible with screens that have VESA 50mm/75mm/100mm mounting hole patterns. Arm extends from wall up to 17.7" or folds flat to save space. The two arm assembly allows the full articulation of the monitor/keyboard, folds up to 3" from the wall and extends 17.7" to the center mounting of the monitor. This mount has two articulating joints which together provide 180 degrees of movement. Cosmetic cover provides cable management. How to check whether this mount fits your LCD? First the weight of your LCD must be less than 44 lb. If your LCD Monitor or TV has 4 holes on the back of the screen that are either50mm, 75mm or 100mm apart from each other vertically and horizontally, then this bracket will fit. If you currently have a stand attached to your LCD TV this is usually removed prior to fitting the wall mount and 4 holes should be revealed.
You'll probably need to buy hardware to mount this.April 19, 2008 1 out of 1 found this review helpful
The description isn't really clear about this mount, neither are the instructions. It is a pretty sturdy bracket that has plastic pieces to cover the workings, but they don't stay on too well. Black electrical tape remedies this problem. The hardware to mount this to the wall only works if you attach to a wall stud or into concrete. If you hang it on drywall or plaster only you'll be heading to the hardware store to get some mollys or other type of fasteners (only use this method if your TV is small and light). The screws included to mount the TV to the bracket were too short for my application, and may be for yours also. I could only get a thread or two into the TV, and thats not enough. So you'll need a bit longer screws. The thumbscrew that sets tension for tilt (up and down) is hard to tighten due to location and the slot is a little too wide, so the TV slants a little to the left or right. Once the screw is tightened to prevent this, the TV won't tilt. Other than that, it works fine.
unusableMarch 25, 2008 1 out of 1 found this review helpful
These were a great price..I should have known. I bought 2. The fit was so bad they were unusable...the monitor would not stay and tilted sideways. Maybe I can use them to hold a cookbook.
Low QualityFebruary 8, 2008 The Wall Mount itself is not as strong as I had hoped and it started to fall out of the wall when I attached the TV. Even when using the anchors it was not very sturdy.
Pretty NiceJanuary 30, 2008 I had no trouble "squeezing" in the electrical cord and cable in the "flimsy" plastic casing, but the plastic wouldn't stay shut until I super glued it together.
OK Product for the Price... but only for TVs under 30 Pounds!!!December 8, 2007 2 out of 2 found this review helpful
Pros: Easy to install. Plastic covers hide the cables, although they are a little flimsy. Cons: Lots of bend in the metal arms from the weight of my 39 pound, 26 inch, TV. Unit doesn't have a clock-wise/counter clock-wise rotation for the TV, so there is no adjustment for the bend in the arms. The bend in the arms also prevents the plastic covers from staying in place when swing the arms out. Mounting holes did not match up with my TV. I wouldn't recommend this wall mount for TVs over 30 pounds.
Select Language
Copyright 2007 www.onlinedigitalshop.info All Right Reserved
