Color:Silver Media:Electronics Autographed:No Memorabilia:No Number Of Items:1 Batteries Included:No Shipping Weight (lbs):10.8 Dimensions (in):15 x 4 x 13 Legal Disclaimer:Warranty does not cover misuse of product.
Product Description Designed to support LCD monitors with 100mm/200mm VESA hole patterns, the Axsys articulating wall mount can safely hold monitors weighing up to 100 lbs. It also features a unique design, which allows for leveling of the monitor, up to 5 degrees rotation left or right, in any position it is placed in. Offering articulation at the wall and monitor, the mount permits for 5 degrees upward tilt and 15 degrees downward tilt for the precise viewing angle. The mount extends 18.5" from the wall, which allows for 180 degree side-to-side viewing depending on the size of the monitor. Additionally, the extended arm has been thoughtfully designed to completely disappear behind the monitor when it is pushed back to the wall.
Customer Reviews:
Excellent ProductDecember 27, 2006 3 out of 3 found this review helpful
I just installed this about 4 hours ago. It took me an hour, even with my drill's batteries needing a charge. The trick is to follow the instructions. I looked around at many wall mounts and this was the best choice. It is recommended to mount it into a stud. Luckily in order for it to be centered on the wall I needed a stud approximately 16 inches to the left/right, and there was one there. It gives you offset holes to screw into a stud if you absolutely need it to be in a particular location.
Process: 1 - Find Stud/Location to hang wall mount 2 - Place wall mounting bracket on the wall and mark drill hole. 3 - Using a 3/16" drill bit drill about 1 1/2 inches into the stud 4 - Screw long wood screw into the wall bracket/stud using a low speed drill. 5 - Approximately level vertically using a bubble level. Mark slotted hole and drill 3/16" hole again 1 1/2 inches deep into the stud. 6 - Screw long wood screw into the wall bracket/stud using a low speed drill until there is just enough play to move the bracket so it can be leveled finally. 7 - Level wall bracket vertically using level and tighten both screws. 8 - Finish inserting the last two screws. 9 - Follow the instructions on the sheet for the rest. Be sure to install the break mechanism that is supplied with the device. It really works well and you can tighten the stiffness of both arms.
I left the front tilt screws just loose enough that I can place the LCD at any tilt without it falling all the way forward. I used a level to level the LCD horizontally and tightened those screws pretty good so it wouldn't lean on me.
It looks great and I can sit in my kitchen and pull it from the wall and angle it towards me, or I can sit on the couch and have it tight against the wall.
I'm going to look into zip tying the wires to the arm.
Leaves Alot To Be Desired In A Wall MountDecember 11, 2006 1 out of 2 found this review helpful
I bought this same wall mount at Best Buy. With the help of my son we put this up a couple of days ago. I am very disappointed in the overall design. I don't like the fastener's they use. This wall mount replaced another wall mount for a regular tv and that one was very secure in it's fastener's. This one makes me fear finding the LCD tv laying on the floor some morning.
My biggest complaint about this is the lack of assembly instruction's. I finally tossed the instruction's aside and just winged it. I also bought this particular LCD wall mount because it tilts...well, we have tried and tried and still cannot figure out how to get this piece of junk to tilt so I am now going to return this to Best Buy and I'm looking for a new/better one.
If the previous reviewer could tell me how they got theirs to tilt I would be ever so greatful.
Oh and one more problem, once you put the plate on the back of the TV it cover's up all of your electronic ports. I'm not sure once we complete the install of HighDef service if I'll even be able to use this model because the plate covers up the HDMI port.
There has to be better quality LCD wall mounts out there.
Works for meJuly 27, 2006 1 out of 1 found this review helpful
Simple and does the job. No surprises. I had no trouble setting it up by myself. The trick is putting the TV on the arm before putting the arm into the wall mount. Gravity does all the work that way.
Articulating Arm ReviewSeptember 8, 2005 6 out of 6 found this review helpful
The wall mount is fine but was somewhat difficult for one person to install - the TV is difficult to attach. Also, it wasn't described very well and the dimensions were not included. I didn't know how it was going to fit or work until I received it. It would also be nice if there was some way to attach the TV cables to the arm or route them through the arm so they don't show. Now that I have mounted it, I like it.
Select Language
Copyright 2007 www.onlinedigitalshop.info All Right Reserved
